1 in. x 2 ft. x 10 ft. Shaftwall Liner Panel | D1SL10-GE

These drywall boards accept most types of paints, textures and wall covering materials. The surface shall be primed and sealed with a full-bodied latex primer before applying a final decorative material. This will equalize the suction between the joint compounds and the paper surface. For best painting results, all surfaces, including joint compound, should be clean, dust-free and not glossy. If glossy paints are used, a thin skim coat of compound over the entire surface, Level 5 finish, is recommended to reduce highlighting or joint photographing.

• Used for elevator shafts, area separation walls, stairwells, and other interior mechanical system enclosures
• Noncombustible, dimensionally stable gypsum core
• For interior use
• Double beveled edges for easy installation