3 ft. 3 in. x 98 ft. 5 in. DITRA Uncoupling Membrane (323 sq. ft. Roll) | SHL-DITRA30M

Schluter's DITRA Uncoupling Membrane is made of polyethylene with a grid structure of square cavities, each cut back in a dovetail configuration, and an anchoring fleece laminated to the underside. The anchoring fleece is embedded in thin-set mortar to provide a mechanical bond to the substrate. Tile is installed over DITRA using the thin-bed method in such a way that the mortar becomes mechanically anchored in the square, cutback cavities of the matting. Designed specifically for ceramic tile and dimension stone installations, DITRA serves as an uncoupling layer, waterproofing membrane, and vapor management layer that accommodates moisture from beneath the tile covering.

• This product is for interior use only, dry or wet areas
• DITRA is only 1/8 in. (3.5 mm) thick to provide the thinnest possible assembly without sacrificing performance
• Provides uncoupling, waterproofing, vapor management, and heavy load distribution to ensure the durability and integrity of tile installations
• Quick and easy to install on top of concrete, plywood, OSB, gypsum, existing vinyl floors, structural planks, sub-floors, and radiant heated floors
• Convenient tile underlayment alternative to cement backer board or plywood